Specifications

Specifications for MOV Surge Models

Summary

Model PDX-915R PDX-920R
Nominal Voltage	120VAC
Voltage Range	Minimum: 80VAC, Maximum: 140VAC
Frequency	60 Hz
Maximum Peak Load	15A 20A
Rated Load	12A 16A
Number of Outlets	9
Outlet Type	NEMA 5-15R NEMA 5-20R
Overload Protection	Circuit Breaker
Outlet Control	Contact Closure
No Load Power Dissipation	< 1W
Input Power Cord	SignalSAFE IEC to 5-15P, 10’ (3M) SignalSAFE IEC to 5-20P, 10’ (3M)
Certifications	UL 62368, UL 1449, FCC Class B, ICES 7

 

Hardware Features

Model PDX-915R and PDX-920R
Surge Protection	Multi-Stage MOV
Peak Impulse Current (8/20µS Waveform)	45,000 Amps, one time - Maximum peak impulse current pulse as defined between line and neutral. 19,500 Amps, two times within 5 minutes - Maximum multiple impulse current derated per spec.
Protection Mode	Line to Neutral only; no ground contamination.
Response Time	Less than 1 nanosecond.
Surge Energy Dissipation	705 Joules (10/100µS)
Voltage Protection Rating	500V (L-N); Type 3 SPD
EMI/RF Suppression	>20dB Calculated Line to Neutral - 100kHz to 1Mhz - based on nominal impedance.
Overvoltage Threshold	Upper Limit Cutoff: 135V RMS Upper Limit Restore: 126V RMS
Undervoltage Threshold	Lower Limit Cutoff: 100V RMS Lower Limit Restore: 105V RMS

 

Physical

Model PDX-915R PDX-920R
Dimensions (Width x Height x Depth)	19” (483mm) x 1.735” (44mm) x 8.75” (222mm)
Product Weight	6.84 lbs (3.1 kg)
Shipping Weight	9.92 lb (4.5 kg) 10.58 lb (4.8 kg)

 

Warranty

Model PDX-915R and PDX-920R
Power Distribution	Three Years Limited For warranty information, refer to www.legrandav.com/policies/warranty_information.

 

Specifications for Series Surge Protection Models

Summary

Model PDX-915R-SP PDX-920R-SP
Nominal Voltage	120VAC
Voltage Range	Minimum: 80VAC, Maximum: 140VAC
Frequency	60 Hz
Maximum Peak Load	15A 20A
Rated Load	12A 16A
Number of Outlets	9
Outlet Type	NEMA 5-15R NEMA 5-20R
Overload Protection	Circuit Breaker
Outlet Control	Contact Closure
No Load Power Dissipation	<1W
Input Power Cord	SignalSAFE IEC to 5-15P, 10’ (3M) SignalSAFE IEC to 5-20P, 10’ (3M)
Certifications	UL 62368, UL 1283, UL 1449, FCC Class B, ICES 7

 

Hardware Features

Model PDX-915R-SP PDX-920R-SP
Surge Protection	Series
Voltage Protection Rating	330V (L-N); Type 3 SPD
Maximum Applied Surge Voltage	6000 Volts (1.2 x 50µS Pulse, Industry Standard Combination Wave Per IEEEC62.41)
Maximum Applied Surge Current	Unlimited (Due to Inherent Current Limiting)
Maximum Applied Surge Energy	Unlimited (Due to Inherent Current Limiting)
EMI Filter, Differential Mode	40dB@100kHz 50dB@100kHz
50Ω Load	50dB@3MHz 50dB@30MHz
EMI Filter, Common Mode	18dB@100kHz 30dB@100kHz
50Ω Load	50dB@3MHz 50dB@30MHz
Overvoltage Threshold	Upper Limit Cutoff: 135V RMS Upper Limit Restore: 126V RMS
Undervoltage Threshold	Lower Limit Cutoff: 100V RMS Lower Limit Restore: 105V RMS

 

Physical

Model PDX-915R-SP PDX-920R-SP
Dimensions (Width x Height x Depth)	19” (483mm) x 1.735” (44mm) x 8.75” (222mm)
Product Weight	8.6 lb. (3.9 kg)
Shipping Weight	11.47 lb. (5.2 kg) 12.35 lb. (5.6 kg)

 

Warranty

Model PDX-915R-SP and PDX-920R-SP
Series Surge Module	Twelve Years Limited For warranty information, refer to www.legrandav.com/policies/warranty_information.